Ezgo 1600xd, Repair Manual

Page: 170 / 416

5
-12
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
4.4 SHIFT CABLE LENGTH
UUVW504A
UUVW503A
Put the shift lever to the "N" position. Then, adjust
the length of the section A of the gear selector ca-
ble using the nut on the adjusting screw at its lever
side mounting section.
Set length for section A: 40 mm (1.575 in.)
Put the shift lever to the "N" position. Then, adjust
the length of the section B using the nut on the ad-
justing screw at the mounting section on the shift
arm side.
To adjust the set length for the section B, set the
shift lever in the neutral state on the transmis-
sion case side, pull the cable gently to fi t it into the
mounting bracket, and then adjust the cable length
so that the lever can be moved to each gear posi-
tion freely. Then, tighten the mounting nut.
1.
2.
4.5 FRONT WHEEL DRIVE CABLE LENGTH
UUVW507A
UUVW508A
Set the differential lock lever to the "UNLOCK" po-
sition. Then, adjust the differential lock cable length
to the bracket with the nut on the adjusting screw
from its mounting sections on both sides.
Set length for section E: 40 mm (1.575 in.)
To adjust the set length for the section F, set the dif-
ferential lever in the "UNLOCK" position on the rear
axle case side, pull the cable gently to fi t it into the
mounting bracket, and then adjust the cable length
so that the lever can be moved to the "LOCK" posi-
tion freely. Then, tighten the mounting nut.
1.
2.
TRANSMISSION - INSPECTION AND ADJUSTMENT
UTV(EZGO향)_05_TRANSMISSION.indd 12 UTV(EZGO향)_05_TRANSMISSION.indd 12 2011-04-04 오후 3:58:16 2011-04-04 오후 3:58:16