Ezgo 1600xd, Repair Manual

Page: 281 / 416

9
-19
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
FRONT AXLE - DISASSEMBLY, SERVICE AND ASSEMBLY
5.4 FRONT DIFFERENTIAL CASE DISASSEMBLY AND ASSEMBLY
UUVW840A
Remove the front differential case (1), differential as-
sembly (2) and front differential case cover (3). Keep
the adjusting shims (4) in a safe place to install them
back to their original state during assembly. 2.
UUVW839A
Unscrew the front differential case mounting bolts (1)
(M10, 7 EA) with the 14 mm socket wrench. 1.
Bolt specifi ed torque ......... 39.2 ~ 44.1 Nm
4.0 ~ 4.5 kgf-m
28.8 ~ 32.4 lb-ft
UUVW841A
UUVW842A
Pull out the oil seal (1) and unfold the staking part
of the staking nut and unscrew the caulking nut (2).
Then, tap the spiral bevel pinion shaft from outside in-
ward to remove the bevel pinion shaft (3).
If necessary, remove the taper roller bearing.
When reassembling them, replace the oil seal with a
new one and apply grease to its mating surface.
Assemble in the reverse order of disassembly.
3.
4.
CHASSIS
UTV(EZGO향)_09_FRONT AXLE.indd 섹션1:19 UTV(EZGO향)_09_FRONT AXLE.indd 섹션1:19 2011-04-04 오후 4:16:01 2011-04-04 오후 4:16:01