Ezgo 1600xd, Repair Manual

Page: 88 / 416

3
-50
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
ENGINE - INSPECTION AND ADJUSTMENT
5.13 FLYWHEEL DEFLECTION AND
CRANKSHAFT END PLAY CHECK
5.14 OIL PUMP CHECK
CLEARANCE BETWEEN ROTOR AND LOBE
OF OIL PUMP
▶
Measure the clearance between the outer rotor and in-
ner rotor with a feeler gauge.
Measure the clearance between the outer rotor and
the housing using a micrometer.
If the clearance exceeds the allowable limit, replace
the pump.
1.
2.
3.
S76W297A
S76W298A
S76W299A
Set a dial indicator with its tip on the rear friction
face of the fl ywheel near the edge.
Turn the fl ywheel to measure the defl ection or the
uneven wear.
If the measured value exceeds the allowable limit,
remove the fl ywheel and check the mating faces of
the crankshaft and fl ywheel.
Measure the end play while moving the crankshaft
with the fl ywheel back and forth to each end.
1.
2.
3.
4.
UUVW222A
Defl ection
Allowable
limit
0.05 mm
(0.0020 in.)
End play
Specifi ed
value
0.15 ~ 0.31 mm
(0.0059 ~ 0.0122 in.)
Allowable
limit
0.5 mm
(0.020 in.)
If the end play exceeds the allowable limit, replace
the side metal bearing (1) . 5.
UUVW2F9A
UTV(EZGO향)_03_ENGINE.indd 50 UTV(EZGO향)_03_ENGINE.indd 50 2011-04-04 오후 3:42:43 2011-04-04 오후 3:42:43