Ezgo 1600xd, Repair Manual

Page: 389 / 416

12
-51
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
●
GROUND TEST
The ground connection is critical for the electric and
electronic circuits' operation. It is often exposed to sev-
eral factors for corrosion such as humidity and dust.
Corrosion produces unnecessary resistance and this re-
sistance can affect the circuit operation. Also, electrically
controlled circuit is very sensitive to ground.
If the ground wiring is loose or corroded, it can greatly af-
fect the electrically controlled circuit.
Even though the ground connection seems to be clean,
there might be a thin corroded layer on the surface.
Perform the following steps for inspecting the ground
connection.
Remove any ground bolt and clip.
Check if there is dirt or corroded layer on the surface.
Clean the surface completely for proper connection.
Tighten bolts and screws fi rmly.
Check parts related to the ground circuit.
If several wirings are connected to one ground termi-
nal, check for proper connection.
All wirings should be clean, securely tightened and
properly grounded. Even the wirings connected to the
one ground point should be cleaned before they are
reinstalled.
T46WB41A
Remove the bolt
(screw).
If there is corrosion,
clean the corroded
surface for proper
contact.
Tighten the bolt.
ELECTRIC SYSTEM - DIAGNOSIS AND TROUBLESHOOTING
UTV(EZGO향)_12_ELECTRIC SYSTEM.in섹션1:51 섹션1:51 UTV(EZGO향)_12_ELECTRIC SYSTEM.in섹션1:51 섹션1:51 2011-04-04 오후 4:36:53 2011-04-04 오후 4:36:53