Ezgo 1600xd, Repair Manual

Page: 235 / 416

7
-25
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
Fit the rubber bellows to the housing and secure it
with the band. 7.
Only the CV joint (1) on the differential case side
can be removed.
The CV joint (2) on the wheel side is pressed in
and cannot be removed.
Remove the CV joint on the differential case side,
and then remove the two boots.
When installing the CV joint, the larger opening
of the bearing cup should be inserted into the
housing fi rst.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
REAR AXLE - DISASSEMBLY, SERVICE AND ASSEMBLY
Drive shaft housing stop ring mounting location
Make sure that the opening of the stop ring seats
on the protrusion of the drive shaft housing.
•
•
Housing
Stop ring
UUVW659A
IMPORTANT
When installing the rear axle drive shaft to the
rear axle case, be careful not to miss the O-ring
and make sure to apply grease on it.
•
UUVW624A
IMPORTANT
참고
REMARK
UUVW681A
UTV(EZGO향)_07_REAR AXLE.indd 25 UTV(EZGO향)_07_REAR AXLE.indd 25 2011-04-04 오후 4:12:29 2011-04-04 오후 4:12:29