Ezgo 1600xd, Repair Manual

Page: 363 / 416

12
-25
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
5.9 ENGINE OIL PRESSURE SWITCH
UUVWA23A
The engine oil pressure switch is installed on the
cylinder block.
If the engine oil pressure drops below 0.5 ± 0.1 kg/cm
2
(7 psi ± 1.4 psi), the circuit in the sensor closed to send
a signal to the oil pressure warning lamp on the instru-
ment panel.
5.10 COOLANT TEMPERATURE SENSOR
UUVWA24A
The coolant temperature sensor is installed on the
coolant fl ange.
It is not recommended to measure the resistence of
temperature sensor separately. Measure the V(DC) on
the display unit while the key is “ON” with the wire con-
nected.
Tester
selector
Tester's measuring point
Remaks Result
Red lead Black lead
Resistance
Oil switch
(+)
Body
(GND)
No
pressure
applied
Continuity
(0.5
Ω
)
Disconnect the engine oil pressure switch connec-
tor and disassemble the engine oil pressure switch to
measure its resistance.
UUVWA95A UUVWAA9A
Disassemble the coolant temperature sensor and soak
it in water in a test container. Prepare the water with its
temperature according to the value in the table below,
Make sure that only the tip of the sensor is soaked in
water.
TEST
ELECTRIC SYSTEM - ELECTRICAL COMPONENTS
UTV(EZGO향)_12_ELECTRIC SYSTEM.in섹션1:25 섹션1:25 UTV(EZGO향)_12_ELECTRIC SYSTEM.in섹션1:25 섹션1:25 2011-04-04 오후 4:36:03 2011-04-04 오후 4:36:03