Ezgo 1600xd, Repair Manual

Page: 335 / 416

11
-31
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
TRANSMISSION
CVT
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
5.3.2 DUMPING CYLINDER DISASSEMBLY
UUVWB71A
UUVWB72A
Turn the head cover (1) counterclockwise from the
dumping cylinder to remove the piston rod assem-
bly (using the notched groove). 1.
Secure the piston rod assembly in a vise and un-
screw the nut to remove the nut (1), spring washer
(2), piston assembly (3), head cover (4) and piston
rod (5) in order. 2.
UUVWB73A
W h e n i n s t a l l i n g t h e h e a d c o v e r, c h e c k t h e
condition of the O-ring (1). If it is not intact,
replace with a new one and apply a sufficient
amount of oil on the new one before installation.
When installing the piston, be careful not to
switch the mounting locations of the piston
packing (1) and wear ring (2). Also, be sure to
install them in the correct direction.
•
•
UUVWB74A
UUVWB75B
IMPORTANT
Toward nut
Toward
Piston head cover
HYDRAULIC SYSTEM - DISASSEMBLY, SERVICE AND ASSEMBLY
UTV(EZGO향)_11_HYDRAULIC SYSTEM.i섹션1:31 섹션1:31 UTV(EZGO향)_11_HYDRAULIC SYSTEM.i섹션1:31 섹션1:31 2011-04-04 오후 4:29:20 2011-04-04 오후 4:29:20