Ezgo 1600xd, Repair Manual

Page: 329 / 416

11
-25
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
TRANSMISSION
CVT
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
ASSEMBLY
●
UUVWB30A
When installing the detent ball, insert the spring into
the spool, apply grease to the balls (1) and insert
them to the three holes of the spool. Then, place
the detent ball (2) onto the spring. 1.
After installing the detent housing (1), press the de-
tent ball into the position below the three balls in the
spool with a tool to lower down the detent housing. 2.
UUVWB31A
Fit the tool into the hole of the lever (1) as shown
in the fi gure to fi x the spool in position. Then, tap
the detent housing with a hammer to screw it to the
valve body. 3.
UUVWB32A
After screwing the detent housing (1) into the valve
body, install the adjusting screw (2) and adjusting
nut (3) and lower the lever in the arrow direction to
the detent position (lever fi xing (not returning) posi-
tion). Then, tighten the detent housing mounting nut
(4) to secure the housing.At this time, set the num-
ber of the adjusting screw threads protruded from
the adjusting nut to be the same before its removal. 4.
UUVWB33A
HYDRAULIC SYSTEM - DISASSEMBLY, SERVICE AND ASSEMBLY
UTV(EZGO향)_11_HYDRAULIC SYSTEM.i섹션1:25 섹션1:25 UTV(EZGO향)_11_HYDRAULIC SYSTEM.i섹션1:25 섹션1:25 2011-04-04 오후 4:28:59 2011-04-04 오후 4:28:59