Ezgo 1600xd, Repair Manual

Page: 104 / 416

3
-66
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
6.2.7 PISTON, FLYWHEEL AND CRANKSHAFT
UUVW284A
UUVW285A
Unscrew the connecting rod mounting bolts (1) of
the cylinder piston from the oil pan side and push
the connecting rod toward the head to pull out the
piston assembly. At this time, mark the pistons’
numbers according to their corresponding cylinders
in order to install them into their original positions
later. 1.
UUVW286A
Unscrew the fi ve fl ywheel mounting bolts (M10, 1)
and pull the fl ywheel to remove it. (14mm) 2.
ENGINE - DISASSEMBLY, SERVICE AND ASSEMBLY
DISASSEMBLY
●
UUVW287A
Unscrew the 17 main bearing case cover mounting
bolts (M8, 1) and remove the main bearing case
cover, oil seal, bearing case gasket and bearing
case cover gasket in order. For the bearing case
cover mounting bolts, unscrew the outer bolts fi rst
and then the inner bolts later. 3.
UUVW288A
Bolt (M8)
tightening torque ............30 ~ 34 Nm
3.0 ~ 3.5 kgf-m
22 ~ 25 lb-ft
Unscrew the two main bearing case bolts (M8,1)
tightened to the cylinder block. (13 mm) 4.
UTV(EZGO향)_03_ENGINE.indd 섹션1:66 UTV(EZGO향)_03_ENGINE.indd 섹션1:66 2011-04-04 오후 3:43:39 2011-04-04 오후 3:43:39