Ezgo 1600xd, Repair Manual

Page: 276 / 416

9
-14
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
FRONT AXLE - DISASSEMBLY, SERVICE AND ASSEMBLY
Unscrew the brake caliper (1) mounting bolts (M8, 2 EA)
to remove the brake caliper. 3. Remove the slotted nut (1) and split pin under the tie
rod end mounting bolt as well as the slotted nut (2)
and split pin under the front knuckle mounting bolt to
separate the tie rod end and lower arm. 5.
When installing the tie rod end mounting bolt,
tighten the slotted nut to the specifi ed torque and
then tighten it further until the split pin hole is
aligned with the nut groove.
•
Slotted nut
tightening torque ............ 54 ~ 61 Nm
5.4 ~ 6.1 kgf-m
38.9 ~ 43.9 lb-ft
IMPORTANT
UUVW817A
UUVW818A
Pull out the axle cap (1) and remove the slotted nut (2).
Then, tap the brake disc assembly (3) forward gently
to remove it as one unit. 4.
Slotted nut
tightening torque ............... 95 Nm
9.7 kgf-m
70 lb-ft
UUVW874A UUVW875A
Tap the lower arm (1) downward to remove it. Then,
pull the knuckle (2) down to separate it from the front
axle drive shaft. 6.
UUVW876A
UTV(EZGO향)_09_FRONT AXLE.indd 섹션1:14 UTV(EZGO향)_09_FRONT AXLE.indd 섹션1:14 2011-04-04 오후 5:40:27 2011-04-04 오후 5:40:27