Ezgo 1600xd, Repair Manual

Page: 118 / 416

3
-80
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
UUVW2C3A
Unscrew the two air cleaner mounting bolts (M8,
1) and two intake duct mounting nuts (M8, 2) using
the 12 mm spanner to remove the air cleaner as-
sembly. 7.
UUVW2C4A
Unscrew the one alternator guide mounting bolt
(M8), two gear case bracket mounting bolts (M6,
1), two cooling fan mounting bolts (M8, 2) and four
retainer bolts (M6, 3) using the 12 mm spanner (T
type) and 10 mm spanner to remove the cooling
fan, retainer, alternator and fan belt. 8.
UUVW2C5A
Undo the coolant hose band to disconnect the
coolant hose (1). Then, disconnect the engine stop
solenoid connector (2) and accelerator wire (3) and
unscrew the four speed control plate cover mount-
ing bolts and nuts (M6, 4) using the 10 mm span-
ner to open the cover and disconnect the governor
spring. (See 6.2.3 “Speed control plate and gover-
nor spring.”) 9.
UUVW2C6A
Unscrew the crankshaft pulley mounting nut using
the 29 mm socket wrench.
Make sure that the pulley does not rotate by sup-
porting its inner angular part with a jig when un-
screwing the pulley mounting nut.
10.
ENGINE - DISASSEMBLY, SERVICE AND ASSEMBLY
UTV(EZGO향)_03_ENGINE.indd 섹션1:80 UTV(EZGO향)_03_ENGINE.indd 섹션1:80 2011-04-04 오후 3:44:17 2011-04-04 오후 3:44:17