Ezgo 1600xd, Repair Manual

Page: 250 / 416

8
-6
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
4. INSPECTION AND ADJUSTMENT
4.1 BRAKE DISC THICKNESS
UUVW703A
4.2 BRAKE DISC RUNOUT
UUVW704A
Measure the thickness of the front/rear brake discs
with a micrometer.
Standard disc thickness: 4.0 mm (0.157 in.)
Allowable limit: 3.5 mm (0.138 in.)
1.
Check if the surface of the disc is worn unevenly,
scratched or split. If an abnormal condition is
found, replace it with a new one.
•
IMPORTANT
Measure the thickness of the parking brake disc
with the same procedure.
Standard disc thickness: 4.0 mm (0.157 in.)
Allowable limit: 3.5 mm (0.138 in.)
2.
Set a dial gauge on top of the lower arm of the rear
axle. Measure the runout while turning the hub left
and right with the sensor in contact with the side
of the brake disc lightly.
Standard runout: 0.254 mm (0.01 in.) or lower
Measure the runout of the parking brake disc with
the
same procedure.
Standard runout: 0.35 mm (0.0138 in.) or lower
1.
2.
BRAKE - INSPECTION AND ADJUSTMENT
UTV(EZGO향)_08_BRAKE.indd 6 UTV(EZGO향)_08_BRAKE.indd 6 2011-04-04 오후 4:13:54 2011-04-04 오후 4:13:54