Ezgo 1600xd, Repair Manual

Page: 222 / 416

7
-12
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
If the center of the contact mark is too close to the toe
of the tooth, decrease the amount of shims (C) on the
spiral bevel pinion (1) side, increase the amount of
shims (A) and decrease the amount of shims (B) on the
37 spiral bevel gear (2) side to push the 37 spiral bevel
gear assembly (differential case assembly) into the spi-
ral bevel pinion side so that the backlash is maintained.
Then, measure the backlash.
• TOE CONTACT
T85W614A
Ring gear : Spiral bevel gear
• HEEL CONTACT
If the contact mark is close to the heel of the ring gear
teeth, decrease the shims (A) on the ring gear side,
increase the amount of shims (B) to push the ring gear
(2) away from the pinion (1) and increase the amount
of shims (C) so that the backlash is maintained. Then,
measure the backlash.
T85W615A
Ring gear : Spiral bevel gear
CONTACT CHECK AND SHIM ADJUSTMENT
If the contact mark is deep into the ring gear teeth,
decrease the amount of shims (C) on the pinion (1),
increase the amount of shims (B) on the ring gear
(2) and decrease the amount of shims (A) so that the
backlash is maintained.
• DEEP CONTACT
T85W616A
Ring gear : Spiral bevel gear
If the contact mark is on the tip of the ring gear teeth,
increase the amount of shims (C) on the pinion (1) side,
decrease the shims (B) on the ring gear (2) side and in-
crease the shims (A) so that the backlash is within the
specifi ed range.
• TIP CONTACT
T85W617A
Ring gear : Spiral bevel gear
UUVW609A
T2185-43861
T 45
2
0- 4
3 011
A
2
C C
1
B
REAR AXLE - INSPECTION AND ADJUSTMENT
UTV(EZGO향)_07_REAR AXLE.indd 12 UTV(EZGO향)_07_REAR AXLE.indd 12 2011-04-04 오후 4:11:44 2011-04-04 오후 4:11:44