Ezgo 1600xd, Repair Manual

Page: 331 / 416

11
-27
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
TRANSMISSION
CVT
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
ASSEMBLY
●
UUVWB59A
When installing the detent ball, apply grease to the
three balls (1) and insert them to the three holes of
the spool. Then, insert the detent ball (2) into the
center. 1.
Install the adapter (1) as shown in the fi gure and
tighten it fully with a hand. 2.
UUVWB60A
The ball is in the floating (detent) status when
seating it onto the section (A) of the adapter and
installing it completely to place it to the section
(B).
•
REMARK
UUVWB61A
Insert the springs (double) (1) into the spool as
shown in the fi gure. 3.
UUVWB62A
Fit the tool to the lever (1) and apply grease to the
three balls (2). Then, with the lever pushed down,
insert the three balls (2) into the three holes on the
upper section of the spool and place the detent ball
(4) onto the spring (3) in the center. 4.
UUVWB63A
Fit the detent housing (1) and screw it in with a
hand. 5.
UUVWB64A
HYDRAULIC SYSTEM - DISASSEMBLY, SERVICE AND ASSEMBLY
UTV(EZGO향)_11_HYDRAULIC SYSTEM.i섹션1:27 섹션1:27 UTV(EZGO향)_11_HYDRAULIC SYSTEM.i섹션1:27 섹션1:27 2011-04-04 오후 4:29:06 2011-04-04 오후 4:29:06