Ezgo 1600xd, Repair Manual

Page: 238 / 416

7
-28
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
5.8 REAR PROPELLER SHAFT REPLACEMENT
Park the vehicle on level ground, apply the parking
brake and stop the engine. 1.
UUVW671A
Unscrew the parking brake caliper mounting bolts
(1) to remove the caliper assembly (2). 3.
UUVW672A
Tap the propeller shaft mounting spring pin (1) on
the rear axle case side and unscrew the brake disc
mounting bolts (2) to remove the brake disc. 4.
UUVW673A
Loosen the left and right mounting bolts (1) (M8, 4
EA) for the stabilizer. 5.
UUVW674A
Pull the propeller shaft toward the rear axle case
with the stabilizer lifted up to separate it from the
transmission case. Then, pull it toward the trans-
mission case to remove it. 6.
If the propeller shaft to be removed is interfered
with the transmission due to its torque angle,
rotate the rear wheels to fi nd the right angle so
that it can be removed without any interference.
•
REMARK
Raise and support the cargo bed. 2.
UUVW689A
REAR AXLE - DISASSEMBLY, SERVICE AND ASSEMBLY
UTV(EZGO향)_07_REAR AXLE.indd 28 UTV(EZGO향)_07_REAR AXLE.indd 28 2011-04-04 오후 4:12:38 2011-04-04 오후 4:12:38