Ezgo 1600xd, Repair Manual

Page: 154 / 416

4
-16
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
Lock nut
tightening torque ............3.9 ~ 5.9 Nm
40 ~ 60 kgf-cm
2.9 ~ 4.3 lb-ft
4. Unscrew the centrifugal lever fixing bolt(1) from
sliding pulley assembly and remove the centrifugal
lever(2), thrust washer(3) and lock nut(4).
5. Assemble in the reverse order of disassembly.
UUVW348A
REMARK
UUVW349A
When reassembling the spider assembly, make
sure to set its thrusting part faces downward.
•
The left and right covers (2) should be installed
with their protrusive area contacting with the slot
on the lower side of the spider body.
•
UUVW350A
UUVW351A
When reassembling the sliding frange assembly,
fit it to its original position with the centrifugal
lever assembled in order to maintain the rotating
balance of whole drive pulley assembly.
•
IMPORTANT
UUVW347A
3. Remove the upper and lower covers (1) from the
spider assembly, and remove the washers (2),
spacer (3) and pin (4) in order. Then, remove the
spring pin (5) from its left and right side and remove
the washers (6), spacer (7) and pin (8) in order.
UTV(EZGO향)_04_CVT.indd 16 UTV(EZGO향)_04_CVT.indd 16 2011-04-04 오후 3:46:04 2011-04-04 오후 3:46:04