Endress+Hauser Proline Prowirl F 200, Operating Instructions Manual

Page: 117 / 224

Proline Prowirl F 200 PROFIBUS PA Commissioning
Hauser 117
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Assign simulation process variable – Select a process variable for
the simulation process that is
activated. • Off
• Volume flow
• Corrected volume
flow
• Mass flow
• Flow velocity
• Temperature
• Calculated
saturated steam
pressure
*
• Steam quality
*
• Total mass flow
*
• Condensate mass
flow
*
• Energy flow
• Heat flow
difference
*
• Reynolds number
Off
Value process variable One of the following options is
selected in the
Assign
simulation process variable
parameter (→  117):
• Volume flow
• Corrected volume flow
• Mass flow
• Flow velocity
• Temperature
*
• Pressure
• Calculated saturated steam
pressure
*
• Steam quality
*
• Total mass flow
*
• Condensate mass flow
*
• Energy flow
*
• Heat flow difference
*
• Reynolds number
*
Enter the simulation value for
the selected process variable. Depends on the
process variable
selected 0
Frequency simulation In the Operating mode
parameter, the Frequency
option is selected.
Switch the simulation of the
frequency output on and off. • Off
• On Off
Frequency value In the Frequency simulation
parameter, the On option is
selected.
Enter the frequency value for
the simulation. 0.0 to 1 250.0 Hz 0.0 Hz
Pulse simulation In the Operating mode
parameter, the Pulse option is
selected.
Set and switch off the pulse
output simulation.

For Fixed value option:
Pulse width parameter
(→  104) defines the
pulse width of the pulses
output.
• Off
• Fixed value
• Down-counting
value
Off
Pulse value In the Pulse simulation
parameter (→  117), the
Down-counting value option
is selected.
Enter the number of pulses for
simulation. 0 to 65 535 0
Switch output simulation In the Operating mode
parameter, the Switch option
is selected.
Switch the simulation of the
switch output on and off. • Off
• On Off