Endress+Hauser Proline Prowirl F 200, Operating Instructions Manual

Page: 72 / 224

Commissioning Proline Prowirl F 200 PROFIBUS PA
72 Hauser
10.4.2 Selecting and setting the medium
The Medium selection wizard systematically guides the user through all the parameters
that must be configured in order to select and set the medium.
Navigation
"Setup" menu → Medium selection
‣
Medium selection
Select medium
→  72
Select gas type →  72
Select liquid type →  72
Fixed process pressure →  73
Enthalpy calculation →  73
Density calculation →  73
Enthalpy type →  73
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Select medium – Select medium type. • Gas
• Liquid
• Steam Steam
Select gas type The following conditions are
met:
• Order code for "Sensor
version",
Option "Mass (integrated
temperature measurement)"
• The Gas option is selected in
the Select medium
parameter parameter.
Select measured gas type. • Single gas
• Gas mixture
• Air
• Natural gas
• User-specific gas User-specific gas
Select liquid type The following conditions are
met:
• Order code for "Sensor
version",
Option "Mass (integrated
temperature measurement)"
• The Liquid option is
selected in the Select
medium parameter
parameter.
Select measured liquid type. • Water
• LPG (Liquefied
Petroleum Gas)
• User-specific liquid
Water