Endress+Hauser Proline Prowirl F 200, Operating Instructions Manual

Page: 201 / 224

Proline Prowirl F 200 PROFIBUS PA Technical data
Hauser 201
Temperature
• Saturated steam and liquids at room temperature, if T > 100 °C (212 °F):
< 1 °C (1.8 °F)
• Gas: < 1 % o.r. [K]
• Volume flow: 70 m/s (230 ft/s): 2 % o.r.
• Rise time 50 % (stirred under water, following IEC 60751): 8 s
Mass flow saturated steam
Sensor version Mass (integrated temperature
measurement) Mass (integrated pressure/
temperature measurement)
1)
Process
pressure
[bar abs.] Flow velocity
[m/s (ft/s)] Reynolds
number
Window Measured
value
deviation PremiumCal
2)
Standard PremiumCal
2)
Standard
> 4.76 20 to 50
(66 to 164) Re
2
to Re
max
A1 < 1.6 % < 1.7 % < 1.4 % < 1.5 %
> 3.62 10 to 70
(33 to 230) Re
2
to Re
max
A1 < 1.9 % < 2.0 % < 1.7 % < 1.8 %
In all cases not specified here, the following applies: < 5.7 %
1) Sensor version available only for measuring devices in HART communication mode.
2) Order code for "Calibration flow", option N "0.65% volume PremiumCal 5-point, extended turndown"
Mass flow of superheated steam/gases
4)
Sensor version Mass (integrated pressure/
temperature measurement)
1)
Mass (integrated temperature
measurement) + external pressure
compensation
2)
Process
pressure
[bar abs.] Flow velocity
[m/s (ft/s)] Reynolds
number
Window Measured
value
deviation PremiumCal
3)
Standard PremiumCal
3)
Standard
< 40 All velocities Re
2
to Re
max
A1 < 1.4 % < 1.5 % < 1.6 % < 1.7 %
< 120 Re
2
to Re
max
A1 < 2.3 % < 2.4 % < 2.5 % < 2.6 %
In all cases not specified here, the following applies: < 6.6 %
1) Sensor version available only for measuring devices in HART communication mode.
2) The use of a Cerabar S is required for the measured errors listed in the following section. The measured error used to calculate the error in the
measured pressure is 0.15 %.
3) Order code for "Calibration flow", option N "0.65% volume PremiumCal 5-point, extended turndown"
Water mass flow
Sensor version Mass (integrated temperature measurement)
Process pressure
[bar abs.] Flow velocity
[m/s (ft/s)] Reynolds number
Window Measured value deviation PremiumCal
1)
Standard
All pressures All velocities Re
2
to Re
max
A1 < 0.75 % < 0.85 %
Re
1
to Re
2
A2 < 2.6 % < 2.7 %
1) Order code for "Calibration flow", option N "0.65% volume PremiumCal 5-point, extended turndown"
4) single gas, gas mixture, air: NEL40; natural gas: ISO 12213-2 contains AGA8-DC92, AGA NX-19, ISO 12213-3 contains SGERG-88 and AGA8
Gross Method 1