Operation
Proline Prowirl F 200 PROFIBUS PA
130
Hauser
11
Operation
11.1 Reading the device locking status
Device active write protection:
Locking status
parameter
Operation → Locking status
Function scope of the "Locking status" parameter
Options
Description
None
The access status displayed in the
Access status display
parameter applies
→ 55. Only appears on local display.
Hardware locked
The DIP switch for hardware locking is activated on the main electronics module.
This locks write access to the parameters (e.g. via local display or operating tool) .
Temporarily locked
Write access to the parameters is temporarily locked on account of internal
processes running in the device (e.g. data upload/download, reset etc.). Once the
internal processing has been completed, the parameters can be changed once
again.
11.2 Adjusting the operating language
Detailed information:
• To configure the operating language → 69
• For information on the operating languages supported by the measuring device
11.3 Configuring the display
Detailed information:
• On the basic settings for the local display → 79
• On the advanced settings for the local display → 111
11.4 Reading measured values
With the
Measured values
submenu, it is possible to read all the measured values.
Navigation
"Diagnostics" menu → Measured values → Process variables
‣
Measured values
‣
Process variables
‣
Totalizer 1 to n
‣
Output values
11.4.1 Process variables
The
Process variables
submenu contains all the parameters needed to display the current
measured values for each process variable.
Summary of Contents for Proline Prowirl F 200
Page 224: ...www addresses endress com...
