Endress+Hauser Proline Prowirl F 200, Operating Instructions Manual

Page: 110 / 224

Commissioning Proline Prowirl F 200 PROFIBUS PA
110 Hauser
Parameter overview with brief description
Parameter Prerequisite Description Selection Factory setting
Assign process variable – Select process variable for
totalizer. • Volume flow
• Mass flow
• Corrected volume
flow
• Total mass flow
*
• Condensate mass
flow
*
• Energy flow
*
• Heat flow
difference
*
• Totalizer 1:
Volume flow
• Totalizer 2: Mass
flow
• Totalizer 3:
Corrected volume
flow
Unit totalizer One of the following options is
selected in the
Assign process
variable parameter:
• Volume flow
• Mass flow
• Corrected volume flow
• Total mass flow
*
• Condensate mass flow
*
• Energy flow
*
• Heat flow difference
*
Select the unit for the process
variable of the totalizer. Unit choose list m³
Control Totalizer 1 to n In the Assign process variable
parameter, one of the
following options is selected:
• Volume flow
• Mass flow
• Corrected volume flow
• Total mass flow
*
• Condensate mass flow
*
• Energy flow
*
• Heat flow difference
*
Control totalizer value. • Totalize
• Reset + hold
• hold Totalize
Totalizer operation mode In the Assign process variable
parameter, one of the
following options is selected:
• Volume flow
• Mass flow
• Corrected volume flow
• Total mass flow
*
• Condensate mass flow
*
• Energy flow
*
• Heat flow difference
*
Select totalizer calculation
mode. • Net flow total
• Forward flow total
• Reverse flow total
• Last valid value Net flow total
Failure mode One of the following options is
selected in the
Assign process
variable parameter:
• Volume flow
• Mass flow
• Corrected volume flow
• Total mass flow
*
• Condensate mass flow
*
• Energy flow
*
• Heat flow difference
*
Define the totalizer behavior in
the event of a device alarm. • Stop
• Actual value
• Last valid value Actual value
* Visibility depends on order options or device settings