Endress+Hauser Proline Prowirl F 200, Operating Instructions Manual

Page: 133 / 224

Proline Prowirl F 200 PROFIBUS PA Operation
Hauser 133
Parameter Prerequisite Description User interface
Heat flow difference The following conditions are met:
• Order code for "Sensor version"
option "Mass (integrated
temperature measurement)"
• One of the following options is
selected in the Select gas type
parameter (→  72):
Single gas
Gas mixture
Natural gas
User-specific gas
Displays the heat flow difference
currently calculated.
Dependency
The unit is taken from the Energy flow
unit parameter (→  76).
Signed floating-point
number
Reynolds number With order code for "Sensor version":
option "Mass (integrated temperature
measurement)" Displays the Reynolds number currently
calculated. Signed floating-point
number
Density With order code for "Sensor version":
Option "Mass (integrated temperature
measurement)" Displays the density currently
measured.
Dependency
The unit is taken from the Density unit
parameter.
Positive floating-point
number
Specific volume With order code for "Sensor version":
Option "Mass (integrated temperature
measurement)" Displays the current value for the
specific volume.
Dependency
The unit is taken from the Specific
volume unit parameter.
Positive floating-point
number
Pressure One of the following conditions is met:
• Order code for "Sensor version",
– Option "Mass (integrated
temperature measurement)"
– or
• The Pressure option is selected in
the External value parameter
parameter.
Displays the current process pressure.
Dependency
The unit is taken from the Pressure
unit parameter.
0 to 250 bar
Compressibility factor The following conditions are met:
Order code for "Sensor version"
Option "Mass (integrated temperature
measurement)"
The
Gas option or the Steam option is
selected in the Select medium
parameter.
Displays the compressibility factor
currently calculated. 0 to 2
Degrees of superheat In the Select medium parameter, the
Steam option is selected.
Displays the degree of superheating
currently calculated. 0 to 500 K
11.4.2 Totalizer
The Totalizer submenu contains all the parameters needed to display the current
measured values for every totalizer.
Navigation
"Diagnostics" menu → Measured values → Totalizer 1 to n
‣
Totalizer 1 to n
Assign process variable →  134
Totalizer value 1 to n →  134