Endress+Hauser Proline Prowirl F 200, Operating Instructions Manual

Page: 108 / 224

Commissioning Proline Prowirl F 200 PROFIBUS PA
108 Hauser
Assign status →  109
Switch-on value →  109
Switch-off value →  109
Switch-on delay
→  109
Switch-off delay →  109
Failure mode →  109
Invert output signal
→  109
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Switch output function The Switch option is selected
in the Operating mode
parameter.
Select function for switch
output. • Off
• On
• Diagnostic
behavior
• Limit
• Status
Off
Assign diagnostic behavior • In the Operating mode
parameter, the Switch
option is selected.
• In the Switch output
function parameter, the
Diagnostic behavior option
is selected.
Select diagnostic behavior for
switch output. • Alarm
• Alarm or warning
• Warning Alarm
Assign limit • The Switch option is
selected in the Operating
mode parameter parameter.
• The Limit option is selected
in the Switch output
function parameter
parameter.
Select process variable for limit
function. • Volume flow
• Corrected volume
flow
• Mass flow
• Flow velocity
• Temperature
• Calculated
saturated steam
pressure
*
• Steam quality
*
• Total mass flow
*
• Energy flow
*
• Heat flow
difference
*
• Reynolds number
*
• Totalizer 1
• Totalizer 2
• Totalizer 3
Volume flow
Assign flow direction check • The Switch option is
selected in the Operating
mode parameter.
• The Flow direction check
option is selected in the
Switch output function
parameter.
Select process variable for flow
direction monitoring. • Off
• Volume flow
• Mass flow
• Corrected volume
flow
Volume flow