Endress+Hauser Proline Prowirl F 200, Operating Instructions Manual

Page: 185 / 224

Proline Prowirl F 200 PROFIBUS PA Accessories
Hauser 185
15 Accessories
Various accessories, which can be ordered with the device or subsequently from Endress
+Hauser, are available for the device. Detailed information on the order code in question is
available from your local Hauser sales center or on the product page of the
Hauser website: www.endress.com .
15.1 Device-specific accessories
15.1.1 For the transmitter
Accessories Description
Prowirl 200 transmitter Transmitter for replacement or storage. Use the order code to define the following
specifications:
• Approvals
• Output, Input
• Display/operation
• Housing
• Software

Installation Instructions EA01056D
(Order number: 7X2CXX)
Remote display
FHX50 FHX50 housing for accommodating a display module .
• FHX50 housing suitable for:
– SD02 display module (push buttons)
– SD03 display module (touch control)
• Length of connecting cable: up to max. 60 m (196 ft)
(cable lengths available for order: 5 m (16 ft), 10 m (32 ft), 20 m (65 ft),
30 m (98 ft))
The measuring device can be ordered with the FHX50 housing and a display
module. The following options must be selected in the separate order codes:
• Order code for measuring device, feature 030:
Option L or M "Prepared for FHX50 display"
• Order code for FHX50 housing, feature 050 (device version):
Option A "Prepared for FHX50 display"
• Order code for FHX50 housing, depends on the desired display module in feature
020 (display, operation):
– Option C: for an SD02 display module (push buttons)
– Option E: for an SD03 display module (touch control)
The FHX50 housing can also be ordered as a retrofit kit. The measuring device
display module is used in the FHX50 housing. The following options must be
selected in the order code for the FHX50 housing:
• Feature 050 (measuring device version): option B "Not prepared for FHX50
display"
• Feature 020 (display, operation): option A "None, existing displayed used"

Special Documentation SD01007F
(Order number: FHX50)
Overvoltage protection for
2-wire devices Ideally, the overvoltage protection module should be ordered directly with the
device. See product structure, characteristic 610 "Accessory mounted", option NA
"Overvoltage protection". Separate order necessary only if retrofitting.
• OVP10: For 1-channel devices (characteristic 020, option A):
• OVP20: For 2-channel devices (characteristic 020, options B, C, E or G)

Special Documentation SD01090F
(Order number OVP10: 71128617)
(Order number OVP20: 71128619)