Proline Prowirl F 200 PROFIBUS PA
Technical data
Hauser
195
Digital communication
The measured values are written from the automation system to the measuring device via
PROFIBUS PA.
16.4 Output
Output signal
Pulse/frequency/switch output
Function
Can be set to pulse, frequency or switch output
Version
Passive, open collector
Maximum input values
• DC 35 V
• 50 mA
Voltage drop
• For ≤ 2 mA: 2 V
• For 10 mA: 8 V
Residual current
≤ 0.05 mA
Pulse output
Pulse width
Adjustable: 5 to 2
000 ms
Maximum pulse rate
100 Impulse/s
Pulse value
Adjustable
Assignable measured
variables
• Mass flow
• Volume flow
• Corrected volume flow
• Total mass flow
• Energy flow
• Heat flow difference
Frequency output
Output frequency
Adjustable: 0 to 1
000 Hz
Damping
Adjustable: 0 to 999 s
Pulse/pause ratio
1:1
Assignable measured
variables
• Volume flow
• Corrected volume flow
• Mass flow
• Flow velocity
• Temperature
• Calculated saturated steam pressure
• Steam quality
• Total mass flow
• Energy flow
• Heat flow difference
• Pressure
Switch output
Switching behavior
Binary, conductive or non-conductive
Switching delay
Adjustable: 0 to 100 s
Summary of Contents for Proline Prowirl F 200
Page 224: ...www addresses endress com...
