Proline Prowirl F 200 PROFIBUS PA
Maintenance
Hauser
181
13
Maintenance
13.1 Maintenance tasks
No special maintenance work is required.
13.1.1 Exterior cleaning
When cleaning the exterior of measuring devices, always use cleaning agents that do not
attack the surface of the housing or the seals.
13.1.2 Interior cleaning
NOTICE
The use of unsuitable equipment or cleaning liquids can damage the transducer.
‣
Do not use pigs to clean the pipe.
13.1.3 Replacing seals
Replacing sensor seals
NOTICE
Seals in contact with fluid must always be replaced!
‣
Only Hauser sensor seals may be used: replacement seals
Replacing housing seals
NOTICE
When using the device in a dusty atmosphere:
‣
only use the associated Hauser housing seals.
1. Replace defect seals only with original seals from Hauser.
2. The housing seals must be clean and undamaged when inserted into their grooves.
3. Dry, clean or replace the seals if necessary.
13.2 Measuring and test equipment
Hauser offers a wide variety of measuring and test equipment, such as W@M or
device tests.
Your Hauser Sales Center can provide detailed information on the services.
List of some of the measuring and testing equipment:
13.3 Hauser services
Hauser offers a wide variety of services for maintenance such as recalibration,
maintenance service or device tests.
Your Hauser Sales Center can provide detailed information on the services.
Summary of Contents for Proline Prowirl F 200
Page 224: ...www addresses endress com...
