Endress+Hauser Proline Prowirl F 200, Operating Instructions Manual

Page: 105 / 224

Proline Prowirl F 200 PROFIBUS PA Commissioning
Hauser 105
Minimum frequency value →  105
Maximum frequency value →  106
Measuring value at minimum
frequency →  106
Measuring value at maximum
frequency
→  106
Failure mode →  107
Failure frequency →  107
Invert output signal
→  107
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Assign frequency output The Frequency option is
selected in the Operating
mode parameter (→  103)
parameter.
Select process variable for
frequency output. • Off
• Volume flow
• Corrected volume
flow
• Mass flow
• Flow velocity
• Temperature
• Calculated
saturated steam
pressure
*
• Steam quality
*
• Total mass flow
*
• Energy flow
*
• Heat flow
difference
*
Off
Minimum frequency value In the Operating mode
parameter, the Frequency
option is selected, and one of
the following options is
selected in the
Assign
frequency output parameter
(→  105):
• Volume flow
• Corrected volume flow
• Mass flow
• Flow velocity
• Temperature
• Pressure
• Calculated saturated steam
pressure
*
• Steam quality
*
• Total mass flow
*
• Energy flow
*
• Heat flow difference
*
Enter minimum frequency. 0 to 1 000 Hz 0 Hz