Endress+Hauser Proline Prowirl F 200, Operating Instructions Manual

Page: 100 / 224

Commissioning Proline Prowirl F 200 PROFIBUS PA
100 Hauser
Parameter Prerequisite Description Selection / User
entry
Factory setting
Fixed process pressure The following conditions are
met:
• Order code for "Sensor
version",
Option "Mass flow
(integrated temperature
measurement)"
• In the External value
parameter (→  99) the
Pressure option is not
selected.
Enter fixed value for process
pressure.
Dependency
The unit is taken from the
Pressure unit parameter.

For detailed information
on the calculation of the
measured variables with
steam: →  125

For detailed information
on setting the parameter
in steam applications,
see the Special
Documentation for the
Wet Steam Detection
and Wet Steam
Measurement
application package
0 to 250 bar abs. 0 bar abs.
Steam quality The following conditions are
met:
• Order code for "Application
package":
– Option ES "Wet steam
detection"
– Option EU "Wet steam
measurement"
• The Steam option is
selected in the Select
medium parameter
parameter.

The software options
currently enabled are
displayed in the
Software option
overview
parameter.
Select compensation mode for
steam quality.

For detailed information
on setting the parameter
in steam applications,
see the Special
Documentation for the
Wet Steam Detection
and Wet Steam
Measurement
application package
• Fixed value
• Calculated value Fixed value
Steam quality value The following conditions are
met:
• The
Steam option is
selected in the Select
medium parameter
parameter.
• The Fixed value option is
selected in the Steam
quality parameter
parameter.
Enter fixed value for steam
quality.

For detailed information
on setting the parameter
in steam applications,
see the Special
Documentation for the
Wet Steam Detection
and Wet Steam
Measurement
application package
0 to 100 % 100 %
10.5.3 Carrying out a sensor adjustment
The Sensor adjustment submenu contains parameters that pertain to the functionality of
the sensor.
Navigation
"Setup" menu → Advanced setup → Sensor adjustment
‣
Sensor adjustment
Inlet configuration →  101