Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 63 / 230

D 25
D_PL100
0RS_G
B
.f
m
2
5
-1
12
-
04
.0
7
Item Designation Short description
55 Start inhibit
Indicates that one of the following operating modes
prohibits the machine from being started:
-
milling drum engaged
- drive lever not in centre position
- raising/lowering scraper is actuated
- raising/lowering sliding shoe is actuated
- raising side boards is actuated
- control lever on upper conveyor is actuated
56 Tilt alarm
Lights up whenever the machine exceeds a lateral
inclined angle of > 5.5°.
Whenever the tilt alarm is enabled, the levelling
function is switched into semi-automatic mode.
60 Lighting
To light operating panel when parking lights are
switched on.
61
Water scales / in-
clination indicator
- If the air bubble is located inside the marked area
in the centre of the tube, the machine is standing
on level ground.
- If the air bubble leaves the marked area, one side
of the machine is higher than the other.
62 Fuse box I
Refer to Chapter F for details of assignment to
fuse strips.
63 Fuse box II
Refer to Chapter F for details of assignment to
fuse strips.
64 Fuse box III
Refer to Chapter F for details of assignment to
fuse strips.