Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 91 / 230

D 53
D_PL100
0RS_G
B
.f
m
5
3
-1
12
-
04
.0
7
The following pages describe connection of the MOBA-matic equipment to existing or
missing actual value indicator with the vehicle circuit voltage in considerable detail!
Item Designation Short description
M5 No function
M6 UP button
To increase the nominal value. The machine re-
sponds in automatic or manual mode (change to ac-
tual value).
Machine does not respond in semi-automatic mode
(only for pre-selections, i.e. nominal value specifica-
tions.)
M7 DOWN button
To decrease the nominal value. The machine re-
sponds in automatic or manual mode (change to ac-
tual value).
Machine does not respond in semi-automatic mode
(only for pre-selections, i.e. nominal value specifica-
tions.)
M8
Automatic/ semi-
automatic / manual
button
To switch between automatic, semi-automatic and
manual mode
M9 Input button
When this button is pressed, calibration to zero is
conducted and/or the nominal value is set to match
the actual value
M10 LED display
Enlarged and detailed depiction of functions of the
arrow symbols on the LC display.
The LED is particularly useful when the operator is at
a great distance from the controller and if the sun is
strong.
M11 Connection cable
To connect with the sockets on the operating panel
and/or actual value indicator (O).