Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 70 / 230

D 32
D_PL100
0RS_G
B
.f
m
3
2
-1
12
-
04
.0
7
3 Other controls
3.1 Controls at operator’s control station
Driver’s seat
A driver’s seat on the operator’s control
station should be adjusted to suit the
needs of the driver/operator before start-
ing work.
- To adjust the seat for the weight of the
driver, turn handle (1) on top of back-
rest support until the approximate
weight of the driver is displayed on the
scale (2).
- To set the correct distance from the
operating panel, pull lever (3) for-
wards, then slide seat forwards or
backwards and allow to engage in the
desired position.
- For height adjuster of the backrest, unfasten both handles (4) on the backrest, slide
the backrest upwards or downwards then tighten the handles again to secure back-
rest in this position.
Always ensure that the driver’s seat is properly secured.
seat.tif
1
2
3 4