Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 71 / 230

D 33
D_PL100
0RS_G
B
.f
m
3
3
-1
12
-
04
.0
7
Weather protecting sun roof
The weather protecting sun roof can be
folded down to a lower setting for trans-
port purposes.
- Remove folding cotter pins (1) and re-
taining pins (2) from left and right
guide tubes.
- Move the roof into its lower position by
pulling the bracket (3) on the articulat-
ed roof joint.
- Using folding cotter pins and retaining
pins, secure roof in its lower position
on the relevant bores in the two guide
tubes.
Danger of crushing! Avoid placing fin-
gers near the articulated joints during
the roof folding operation.
To raise the roof, reverse the order of
this procedure.
Side roof
A side roof can be pulled out from the
right-hand side of the weather protecting
sun roof to protect the driver/operator
from rain and strong sunlight.
- Open both brackets on roof tarpaulin.
- Unscrew fastening bolts (4).
- Pull out side roof frame together with
roof tarpaulin by pulling bracket (5).
- Tighten down fastening bolts (4) to se-
cure the roof.
- Secure the tarpaulin with brackets on
the roof frame.
To fold the roof away, reverse the order of this procedure.
$
When vehicle is in motion, side roof must not be extended!
Dach1_PL600.cdr,Dach2_PL600.cd,Dach3_PL600.cdr
1
3
2
4 5