Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 61 / 230

D 23
D_PL100
0RS_G
B
.f
m
2
3
-1
12
-
04
.0
7
Item Designation Short description
48
Warning lamp
„water in fuel“
(yellow)
Lights up if there is excessive water in the fuel system
separator.
$
To prevent damage to the engine, drain off sep-
arated water immediately, in accordance with
the Maintenance Instructions.
Lights up for a few seconds to check that the ig-
nition is engaged.
$
Do not start the engine until this indicator lamp
has gone out.
49
Anti-slip
control
(ASC)
Indicator lamp for ASC
-
Continuous light indicates that the anti-slip control
is active.
- If there is a fault in the anti-slip control unit, a flash
code is issued.
Refer to Malfunctions section
50
Steering aid /
error check
Travel drive (yel-
low)
Always lights up when the steering system is in straight
ahead position as well as during steering movements
with the differential lock activated.
-
If a fault occurs in the travel drive control system, a
flash code is issued.
Refer to Malfunctions section
51 not used
52
Hydraulic filter-
Indicator (yellow)
Lights up if ever hydraulic filter needs replacing.
Replace filter cartridge acc. to Maintenance In-
structions!
53
Battery charge
check (red) Must go out after starting at raised speed.
-
If this light fails to go out, switch off the engine.
54
Fault / trouble-
shooting query
If a fault discovered on the engine is indicated by one
of the warning lamps, a code is displayed which corre-
lates with a defined defect.
Press the button until this 3-digit code is indicated by
the warning lamp.
Refer to „Malfunctions“ section for details of er-
ror code query procedure!