Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 53 / 230

D 15
D_PL100
0RS_G
B
.f
m
1
5
-1
12
-
04
.0
7
Item Designation Short description
34
Selector switch
Scraper
(moldboard) (
&
)
Two switch positions can be selected:
-
0: Moldboard blocked - remains in desired position.
-
~
: Moldboard in floating position
During milling operations, the scraper should al-
ways be in float position. Under certain working
conditions, it is however possible for the scraper
to dig into the substrate. This can be avoided
through use of the blocking or relief function.
35
Selector switch
Sliding shoe
Two switch positions can be selected:
-
0: Sliding shoe blocked - remains in desired posi-
tion.
-
~
: Sliding shoe in floating position
During milling operations, the sliding shoe
should always be in float position. Under certain
working conditions, it is however possible for the
sliding shoe to dig into the substrate. This can be
avoided through use of the blocking or relief
function.