Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 30 / 230

B 18
B_PL100
0RS_G
B
.f
m
1
8
-1
8
-
0
4
.0
7
6.4 Vibration acting on the entire body
When the machine is used for its intended purpose, the weighted effective values of
acceleration at the driver’s seat of a
w
= 0.5 m/s
2
as defined in the draft of prEN 1032-
1995 are not exceeded.
6.5 Vibration acting on the hand-arm
When the machines used for its intended purpose, the weighted effective values of
acceleration at the driver’s seat of a
hw
= 2.5 m/s
2
as defined in the draft of prEN 1033-
1995 are not exceeded.
6.6 Electromagnetic compatibility (EMC)
Compliance with the following limit values in accordance with the protection require-
ments of the EMC Guideline 89/336/EEC/08.95:
- Emitted radiation in accordance with DIN EN 50081-1/03.93:
< 40 dB µV/m for frequencies of 30 MHz - 230 MHz at 3 m measuring distance
< 47 db µV/m for frequencies of 20 MHz - 1 GHz at 3 m measuring distance
- Interference resistance against electrostatic discharging (ESD) in accordance with
DIN EN 61000-4-2/03.96:
The ± 4-KV contact and the ± 8-KV airborne discharge did not result in any influ-
ence on the cold planer which could be detected.
Compliance is maintained with the modifications in accordance with assessment
criterion „A“, i.e. the cold planer continues to operate correctly during the test.
Changes to the electrical or electronic components and their arrangement may only
be conducted with the written approval of the manufacturer.