Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 51 / 230

D 13
D_PL100
0RS_G
B
.f
m
1
3
-1
12
-
04
.0
7
Item Designation Short description
31
Milling drum drive
ON / OFF
This switches the milling drum drive on or off.
-
Top shift position: Milling drum drive engaged,
- Bottom shift position: Milling drum drive engaged.
$
Before the milling drum drive is engaged, check
to ensure that the machine is not lowered to
such a point that the milling drum makes contact
with the substrate.
The milling drum drive can only be activated
when in working gear and when the drive lever
is in its centre position.
The engine cannot be started if the milling drum
drive is engaged!
32
Mode
Upper conveyor
Three switch positions can be selected:
-
0: upper conveyor transport function OFF
- AUTO: transport function is linked to the control le-
ver. The upper conveyor only starts when the mill-
ing procedure begins.
The upper conveyor stops or overruns when the
milling procedure is interrupted or ended.
- 1: transport function of upper conveyor in forwards
direction ON
The upper conveyor only runs in conjunction
with the activated milling drum.
33
Water pump
ON / OFF / AUTO
Three switch positions can be selected:
-
0: Water pump OFF
- AUTO: Water sprinkling is linked to the control le-
ver. The water pump does not start to pump water
until the planing operation starts (deploy the drive
lever).
1: Continuous sprinkling
This water is definitely not drinking quality!