Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 36 / 230

C 6
C_PL100
0RS_G
B
.f
m
6
-8 -
04.
07
6 Towing procedure
Comply with all specifications and introduce all requisite safety measures required for
the towing of construction equipment.
$
The tractor vehicle must be such that it can still hold the machine when travelling
downhill.
Only use authorised towbars!
$
Do not disengage travel drive and release brake until the machine has been properly
secured to prevent accidental rolling away, or is already properly connected to the
towing vehicle.
The engine compartment of the machine
includes a hand pump which must be ac-
tivated in order to tow away the machine.
- First of all, unfasten the lock nut (1) on
the hand pump and tighten the thread-
ing dowel (2) as far as possible into
the pump.
Re-tighten the lock nut for safety.
- Now use the lever to activate the hand
pump (3) until enough pressure has
been developed and the brakes have
released.
The brakes will release themselves at a
pressure of approx. 30 bar.
The machine can now be carefully and
slowly towed out of the construction site area.
$
Always tow the shortest possible distance to transport equipment or to the nearest
safe parking area.
After towing, unfasten the threading dowel (2) a few turns, then secure again using
the lock nut (1).
The brakes are now active again and the machine is protected against rolling away.
Handpumpe.tif
3
2
1