Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 65 / 230

D 27
D_PL100
0RS_G
B
.f
m
2
7
-1
12
-
04
.0
7
Item Designation Short description
70
Drive lever
(advance)
Engagement of travel drive and infinitely variable ad-
justment of driving speed - forwards and reverse.
Centre position: Engine can be started; engine running
at idle speed; no travel drive; machine braked
Maximum speed can be set using the preselector con-
troller.
The engine is unable to start unless the drive le-
ver is in its centre position!
71
Control lever
Upper conveyor
Dual-axis control lever for moving the lower conveyor:
-
Swivel direction, left: swivels the upper conveyor to
the left
- Swivel direction, right: swivels the upper conveyor
to the right
- Swivel direction forwards: lowers the upper con-
veyor
- Swivel direction backwards: raises the upper con-
veyor
The upper conveyor is moved continuously
while the control lever is swivelled in the appro-
priate direction.
Ensure that no-one is standing in the danger
area beside the upper conveyor.
72 Horn
If danger threatens and as an acoustic warning signal,
activate before setting off.
73
Machine raising/
lowering, left-
hand side
The hydraulic cylinder of the left-hand chassis leg is re-
tracted and/or extended by pressing the switch.
-
Operated upwards: Raising vehicle
- Operated downwards: Lowering the vehicle
In order to raise or lower the machine evenly, the
switch can be operated simultaneously with
switch (74).
The engine cannot be started if this function is
engaged!