Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 113 / 230

D 75
D_PL100
0RS_G
B
.f
m
7
5
-1
12
-
04
.0
7
- Insert ignition key (4) in ignition lock in
setting „P“. When starting, ensure that
the light is not switched on in order to
save the battery.
- Switch on ignition (Pos. 1).
- Turn ignition key in Pos. 2 to start the
diesel engine.
Before starting, sound the horn by briefly
pressing the horn button (6).
It is not possible to start the vehicle un-
less the drive lever is in its 0 position or
if the emergency-stop button is pressed,
and the milling drum drive or height ad-
juster must also be engaged.
$
If the engine does not start straightaway, continue starting for a maximum of 20 sec-
onds without a break, then wait 1 minute.
If the battery has gone flat, perform an auxiliary start.
- Once the diesel engine fires, let go of the ignition key.
- The ignition key automatically jumps back into Pos. 1.
- Check operating values using the indicator lamps and display instruments, per-
forming corrections if necessary.
- Allow the machine to warm up if necessary.
P
0
I
II
Panel3_600.cdr
4
6