Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 76 / 230

D 38
D_PL100
0RS_G
B
.f
m
3
8
-1
12
-
04
.0
7
Retaining hook, moldboard
For safety reasons, during maintenance
work on the milling drum or on the milling
drum housing, the moldboard is secured
in its upper position by means of a re-
taining hook.
- Extend the moldboard until the retain-
ing tab on the flap (1) locates in the re-
taining hook (2).
To lower the moldboard, first raise the
flap slightly until the retaining hook can
be swivelled outwards.
When working on the machine with
raised moldboard (e.g. when replacing bit), always secure the flap using the retaining
hook!
Scraper_safety_pl600
1
2