Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 151 / 230

E 1
E_PL100
0RS_G
B
.f
m
1
-4 -
04.
07
E Set-up and modification
1 Special safety instructions
Injury or death can result whenever the engine, travel drive, release unit, conveyor or
lifting units are engaged.
When operating the machine, therefore maintain strict compliance with the sections
of these operating instructions and the safety specifications dealing with personal
conduct. Before starting the machine, ensure that no-one is working on or underneath
the machine, or standing in the danger area!
- Protect machine to prevent it from being started accidentally:
Move drive lever into centre position and turn preselector controller to zero,
remove ignition key and battery’s main switch.
- Secure raised machine components (e.g side board or moldboard) mechanically to
prevent them from lowering accidentally.
- Always use genuine spare parts for replacement, or ensure that genuine parts are
used by others for this same work.
When connecting up or unfastening hydraulic hoses and when working on the hy-
draulic system, hot hydraulic oil can spray out under high pressure.
Switch off engine and depressurise the hydraulic system! Protect eyes!
Before starting the machine up again, ensure that all guards are properly reinstalled.