Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 49 / 230

D 11
D_PL100
0RS_G
B
.f
m
1
1
-1
12 -
04.
07
Item Designation Short description
28
Travel drive
fast / slow
Two switch positions can be selected:
-
Hare: Transportation speed
- Tortoise: Operating speed
When changing from working speed to transpor-
tation speed, the milling drum transmission is
automatically disengaged.
$
This operating mode can only be changed over
once the machine is stationary and the drive le-
ver is in centre position!
29
Hydraulically
swivelling chas-
sis leg in /
out (
&
)
To swivel the right-hand chassis leg in and out, e.g. for
precision milling of edges.
Before the chassis leg is swivelled in or out, it
needs to be retracted completely and the driv-
er’s seat needs to be slid inwards as far as pos-
sible.
Travel is only approved when the chassis leg is
swivelled all the way in or out.
30
Electric
differential lock /
ASC
ON/OFF
To activate and deactivate the differential lock in con-
junction with the anti-slip control (ASC).
Apply when the machine encounters traction prob-
lems.
-
Top shift position: Differential lock ON / ASC ON
- Middle shift position: Differential lock OFF / ASC
ON
- Bottom shift position: Differential lock OFF / ASC
OFF
When in transport gear, the ASC is automatical-
ly deactivated. The differential lock works in
transport and working gear.
During reverse travel, the differential lock is au-
tomatically deactivated. The ASC works during
forwards and reverse travel.
Note „ASC / differential lock“ indicator lamp