Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 67 / 230

D 29
D_PL100
0RS_G
B
.f
m
2
9
-1
12
-
04
.0
7
Item Designation Short description
74
Machine raising/
lowering, right-
hand side
The hydraulic cylinder of the right-hand chassis leg is
retracted and/or extended by pressing the switch.
-
Operated upwards: Raise vehicle
- Operated downwards: Lower the vehicle
In order to raise or lower the machine evenly, the
switch can be operated simultaneously with
switch (73).
The engine cannot be started if this function is
engaged!
75
Raising / lower-
ing scraper
(moldboard) (
&
)
The moldboard is raised or lowered to the upper or
lower limit position whenever the switch is being
pressed in the relevant direction.
Danger resulting from raised loads. Do not enter
the danger area.
76
Raising / lower-
ing the sliding
shoe
The sliding shoe is raised or lowered to the upper or
lower limit position whenever the switch is being
pressed in the relevant direction.
Danger resulting from raised loads. Do not enter
the danger area.
77
Raising left side
board
While the button is being pressed, the left side board is
raised continuously until it reaches its upper limit posi-
tion.
If the switch is released, the side board automatically
lowers into its lower
limit position.
Danger resulting from raised loads. Do not enter
the danger area.
78
Raising the right
side board
While the button is being pressed, the right side board
is raised continuously until it reaches its upper limit po-
sition.
If the switch is released, the side board automatically
lowers into its lower
limit position.
Danger resulting from raised loads. Do not enter
the danger area.