Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 81 / 230

D 43
D_PL100
0RS_G
B
.f
m
4
3
-1
12
-
04
.0
7
Non-return valves for water spraying
/ drain valve on water tank
The non-return and drain valves for the
water system are located behind the
right-hand side flap.
- To cut off water supply to the spray
nozzles on the milling drum sprinkler,
move valve lever (1) into locking posi-
tion.
- If it is necessary to drain the water
tank, move valve lever (2) into
through-flow direction. The water in
the tank is then drained out of an outlet
underneath the machine.
This water is definitely not drinking quality!
$
If there is a risk of sub-zero temperatures, completely drain the water tank using the
drain valve, leave the valve open, unfasten the connecting lines and allow them to
drain. Allow water pump to idle by loosening screw connections, take off water filter
housing and filter insert and remove screw cap from water fill apertures.
Wasser1_PL1000.wmf
2
1