Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 82 / 230

D 44
D_PL100
0RS_G
B
.f
m
4
4
-1
12
-
04
.0
7
Setting valve for water pressure (wa-
ter spraying)
There is a choke valve and a pressure
gauge behind the lateral flap for adjust-
ing and checking the water pressure in
the sprinkling system.
To set the water pressure and water vol-
ume:
- Unfasten lock nut (1) and tighten or
untighten the knurled screw (2) to the
desired setting.
- Check the water pump oil pressure on
the pressure gauge (3) then tighten
down the lock nut (1) to its correct set-
ting.
If the adjusting screw (2) is unscrewed further, the water volume increases and vice
versa!
Steps up to water tank
There is a recessed step (1) in the frame
on the right side of the machine to ena-
ble staff to reach certain parts of the ma-
chine (e.g. to top up the water tank or to
work on the engine).
Hauptsch_PL1000.wmf
2
1
3
Tritt-Tank.cdr
1