Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 121 / 230

D 83
D_PL100
0RS_G
B
.f
m
8
3
-1
12
-
04
.0
7
Milling (preparation) :
- Drive the machine to the planing location and lower manually as far as possible
(milling drum does not make contact with ground at this stage).
Engage the following functions on the main operating panel:
The automatic function for water sprinkling and upper conveyor is engaged as soon
as the drive lever moves out of its central position and is disengaged automatically as
soon as the machine is stopped.
Item Switch Position
28 Transport/working gear Working gear (tortoise mode)
27 Preselector for travel drive Approx. average power
31 Milling drum ON / OFF Milling drum drive ON
33 Water pump ON / OFF „Auto“ pos. or „1“
26 Increase the engine speed „max“
36 Raising and lowering speed Lower switch position (slow)
35 Selector switch for front board Floating position
34
(
&
)
Selector switch for moldboard Floating position
32 Upper conveyor mode „Auto“ pos. or „1“
Panel2_500_1000.wmf/Panel4_1000.bmp
71
70
28
27
26
36 32 35 31 34 33