Dynapac PL 1000 RS, Operation & Maintenance Manual

Page: 116 / 230

D 78
D_PL100
0RS_G
B
.f
m
7
8
-1
12
-
04
.0
7
Driving the machine
- Raise machine uniformly by pressing both switches (73) + (74) together until the
desired ground clearance has been reached. Where applicable, press the switch
for raising and lowering speed (36) to rapid adjustment beforehand.
- Ensure that machine is as horizontally positioned as possible (pay close attention
to the inclination - or „slope“ - indicator)
$
Never fully raise the machine for driving purposes!
Risk of tipping! Ensure adequate ground clearance!
- Move switch (28) into driving gear (hare symbol).
If necessary, move the machine in working gear (tortoise symbol).
- Check that all other functions are switched to „0“ and, if necessary, select this set-
ting.
$
Always operate hazard lights when moving the machine (rotary beacons and hazard
flashers)!
- Set controller for engine speed (26) to „MAX“.
- Move preselector controller for travel drive (27) to full power setting.
- To drive the vehicle, carefully move the drive lever (70) forwards or backwards in
the desired direction of travel.
- The driving speed is set in accordance with the distance the drive lever (70) moves
from its centre position.
- Where necessary, guide the upper conveyor using the control lever (71).
In emergency situations, press the emergency-stop button (20)!
- To stop the vehicle, move the drive lever (70) into its centre position.
Panel2_500_1000.bmp/Panel4_1000.bmp
71
28
20
70
73
74
27 26
36