Chapter 2 Installation
ASDA-B2
2-2
Revision May, 2018
2.3 Ambient Conditions of Installation
Operating Temperature
ASDA-B2 Series Servo Drive:
0°C to 55°C (32°F to 131°F)
ECMA Series Servo Motor :
0°C to 40°C (32°F to 104°F)
The ambient temperature of servo drive should be under 45°C (113°F) for long-term
reliability.
If the temperature of servo drive is greater than 45°C, please place the product in a well-
ventilated environment so as to ensure its reliability performance. If the product is installed
in an electric box, make sure the size of the electric box and its ventilation condition will
not overheat and endanger the internal electronic device. Also, pay attention to the
vibration of the machine. Check if the vibration will influence the electronic device of the
electric box.
Failure to observe the following precautions may void the warranty.
The ambient
conditions should also include:
Location has no over-heat device, no water drop, vapor, dust and oily dust, no
corrosive and inflammable gas and liquid, no airborne dust and metal particles, with
solid foundation and no vibration and no interference of electromagnetic noise.
Do not mount the servo drive or motor in a location where temperatures and humidity
will exceed specification.
Do not mount the servo drive or motor in a location where vibration and shock will
exceed specification.
Make sure the storage environment of servo drive and servo motor complies with the
specification which mentioned in Chapter 10.
