Delta ASD-A3-0121, User Manual

Page: 301 / 603

Parameters ASDA-A3
8-44
Revision December, 2017
8
P1.038 Zero speed range
Address: 014CH
014DH
Operation
interface:
Panel / software Communication
Control mode: All
Default: 10.0 100 Data size: 16-bit
Unit: 1 rpm
0.1 rpm
- -
Setting range: 0.0 – 200.0 0 – 2000 - -
Format:
One decimal
DEC - -
Example:
1.5 = 1.5 rpm
15 = 1.5 rpm - -
Settings:
Sets the range for the zero-speed signal (ZSPD). When the forward / reverse speed of the motor is
slower than this value, the zero-speed signal is triggered and the digital output is enabled.
P1.039 Target speed detection level
Address: 014EH
014FH
Default: 3000 Control mode: ALL
Unit: rpm Setting range: 0 – 30000 (rotary motor)*
0 – 15999 (linear motor)*
Format: DEC Data size: 16-bit
Settings:
When the target speed is reached, DO (TSPD) is enabled. When the forward / reverse speed of the
motor is faster than this value, the target speed signal is triggered and the digital output is enabled.
Note: Rotary motor means a permanent-magnet synchronous rotary motor; linear motor means a permanent-magnet
synchronous linear motor.
P1.040 Maximum rotation speed for analog Speed command
Address: 0150H
0151H
Default: 3000 Control mode: T / Tz
Unit: rpm Setting range: 0 – 5000
Format: DEC Data size: 32-bit
Settings:
Maximum rotation speed for analog Speed command:
Speed mode:
Speed control command =
Input voltage × Setting
10
Set the rotation speed corresponding to 10V (maximum voltage) for the analog Speed command.
If the value is 2000 and the external voltage input is 5V, then the speed control command is 1000 rpm.
Speed control command =
5V × 2000 rpm
10
= 1000 rpm
Torque mode:
Speed limit command =
Input voltage × Setting
10
Set the rotation speed limit corresponding to 10V (maximum voltage) for the analog speed limit.
If the value is 2000 and the external voltage input is 5V, then the speed limit command =
5V × 2000 rpm
10
=
1000 rpm