Delta ASD-A3-0121, User Manual

Page: 348 / 603

ASDA-A3 Parameters
Revision December, 2017
8-91
8
P2.094 ▲ Special bit register 3
Address: 02BCH
02BDH
Default: 0x1000 Control mode: PT / PR / S / Sz
Unit: - Setting range: 0x0000 – 0xF3A6
Format: HEX Data size: 16-bit
Settings:
7 6 5 4 3 2 1 0
Bit
15 14 13 12 11 10 9 8
Bit
Bit Function Description
Bit 15 – 13 Reserved -
Bit 12
Two dimensional
control function
0: disable two dimensional control function
1: enable two dimensional control function
Bit 11 – 10 Reserved -
Bit 9
Second set of
vibration
elimination
0: disable second set of vibration elimination
1: enable second set of vibration elimination (P1.092 –
P1.094)
Vibration elimination takes effect only when the two
dimensional control function P2.094 [Bit 12] is enabled.
Bit 8
First set of
vibration
elimination
0: disable first set of vibration elimination
1: enable first set of vibration elimination (P1.089 – P1.091)
Vibration elimination takes effect only when the two
dimensional control function P2.094 [Bit 12] is enabled.
Bit 7 – 6 Reserved -
Bit 5
Cancel AL016
IGBT overheat
alarm
0: enable AL016 IGBT overheat alarm
1: disable AL016 IGBT overheat alarm
Bit 4
Dynamic brake
options
0: disable new dynamic brake
1: enable new dynamic brake, and force use of the DC Bus
voltage to determine the timing of regenerative energy loss
Bit 3 – 0 Reserved -
P2.095 Notch filter bandwidth (1)
Address: 02BEH
02BFH
Default: 5 Control mode: All
Unit: - Setting range: 1 – 10
Format: DEC Data size: 16-bit
Settings:
The first value of resonance width. This function is disabled if P2.024 is 0. P2.023, P2.024, and P2.095
are the first set of Notch filter parameters.